1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Industrial Equipment
  5. Simatic S7-1500
  6. Equipment manual

Siemens SIMATIC S7-1500 Equipment Manual

Hide thumbs Also See for SIMATIC S7-1500:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMATIC S7-1500

Summary of Contents for Siemens SIMATIC S7-1500

  • Page 2 CPU 1513-1 PN (6ES7513-1AM03-0AB0) Introduction Industrial cybersecurity SIMATIC Product overview Connecting up S7-1500 CPU 1513-1 PN Interrupts, error messages, diagnostics and system (6ES7513-1AM03-0AB0) alarms Equipment Manual Technical specifications Dimensional drawing 11/2023 A5E40881673-AD...
  • Page 3 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 4: Table Of Contents

    Table of contents Introduction ............................4 Guide documentation S7-1500/ET 200MP ................5 1.1.1 Information classes S7-1500/ET 200MP ................5 1.1.2 SIMATIC Technical Documentation ..................7 Industrial cybersecurity ........................10 Introduction to industrial cybersecurity ................10 Cybersecurity information ....................10 Cybersecurity-relevant information ..................11 Product overview ..........................

  • Page 5: Introduction

    Industry Mall The Industry Mall is the catalog and order system of Siemens AG for automation and drive solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power (TIP).

  • Page 6: Guide Documentation S7-1500/Et 200Mp

    Guide documentation S7-1500/ET 200MP 1.1.1 Information classes S7-1500/ET 200MP The documentation for the SIMATIC S7-1500 automation system and the ET 200MP distributed I/O system is arranged into three areas. This arrangement enables you to access the specific content you require. Changes and supplements to the manuals are documented in a Product Information.
  • Page 7 Internet (https://support.industry.siemens.com/cs/de/en/view/68052815). Manual Collection S7-1500/ET 200MP The Manual Collection contains the complete documentation on the SIMATIC S7-1500 automation system and the ET 200MP distributed I/O system gathered together in one file. You can find the Manual Collection on the Internet.

  • Page 8: Simatic Technical Documentation

    Industry Online Support International (https://support.industry.siemens.com/cs/ww/en/view/109742705) Watch this short video to find out where you can find the overview directly in Siemens Indus- try Online Support and how to use Siemens Industry Online Support on your mobile device: Quick introduction to the technical documentation of automation products per video (https://support.industry.siemens.com/cs/us/en/view/109780491)
  • Page 9 • Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN macro files • Manuals, characteristics, operating manuals, certificates • Product master data You can find "mySupport" on the Internet. (https://support.industry.siemens.com/My/ww/en) CPU 1513-1 PN (6ES7513-1AM03-0AB0) Equipment Manual, 11/2023, A5E40881673-AD...
  • Page 10 The application examples support you with various tools and examples for solving your automation tasks. Solutions are shown in interplay with multiple components in the system - separated from the focus on individual products. You can find the application examples on the Internet. (https://support.industry.siemens.com/cs/ww/en/ps/ae) CPU 1513-1 PN (6ES7513-1AM03-0AB0) Equipment Manual, 11/2023, A5E40881673-AD...

  • Page 11: Industrial Cybersecurity

    Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customers' exposure to cyber threats.

  • Page 12: Cybersecurity-Relevant Information

    Operational application environment and security assumptions Requirements for the operational application environ- This section is found in the System Manual ment of the system and security assumptions (https://support.industry.siemens.com/cs/us/en/view/59191792) Area of application You can find the section Area of application (Page 15) in this Equipment Manual.
  • Page 13 Corrective measures for known risks Corrective measures for known risks are announced on the Siemens ProductCERT (https://siemens.com/productcert) Web page. For more information on SIEMENS ProductCERT, refer to the System Manual (https://support.industry.siemens.com/cs/us/en/view/59191792) Security checks Application-specific security measures such as cyclic checks of...

  • Page 14: Product Overview

    Product overview New functions This section contains an overview of the most important new firmware functions of the CPU compared with the predecessor version CPU (V3.0). New functions of the CPU in firmware version V3.1 New functions Applications Customer benefits Integrated safety Syslog messages The CPU stores syslog messages in a local...
  • Page 15 The recording is stored on a drive that you have configured. Reference You can find an overview of all new functions, improvements and revisions in the respective firmware versions on the Internet (https://support.industry.siemens.com/cs/ww/en/view/109478459). CPU 1513-1 PN (6ES7513-1AM03-0AB0) Equipment Manual, 11/2023, A5E40881673-AD...

  • Page 16: Application

    SIMATIC S7-1500 is the modular control system for a wide variety of automation applications in discrete automation. SIMATIC S7-1500 is the cost-effective and convenient solution for a broad range of tasks and offers the following advantages: • Modular, fanless design •...
  • Page 17 High industrial suitability due to the high resistance to EMC, shock and vibration enable universal use of the SIMATIC S7-1500, S7-1500R/H and S7-1500T automation systems. Performance segments of standard CPUs The CPUs can be used for smaller and mid-range applications, as well as for the high-end range of machine and plant automation.
  • Page 18 Product overview 3.2 Application Performance segments of redundant CPUs The CPUs of the S7-1500R/H redundant system offer a high degree of reliability and system availability. A redundant configuration of the most important automation components reduces the likelihood of production downtimes and the consequences of component errors. The higher the risks and costs of a production downtime, the more worthwhile the use of a redundant system.
  • Page 19 Product overview 3.2 Application The following table shows the specific properties of the Compact CPUs. CPU 1511C-1 PN CPU 1512C-1 PN Integrated analog inputs/outputs 5 inputs/2 outputs 5 inputs/2 outputs Integrated digital inputs/outputs 16 inputs/16 outputs 32 inputs/32 outputs High-speed counters Frequency meters 6 (max.
  • Page 20 Product overview 3.2 Application Performance segment PROFIBUS PROFINET PROFINET Basic Work Pro- interfaces IO RT/IRT IO RT PROFINET memory cessing interfaces interface functional- time for bit oper- ations CPU 1518T- Technology CPU for 69 MB 1 ns 4 PN/DP high-performance mo- tion control applications with large quantities, demanding communi-...
  • Page 21 Product overview 3.2 Application For IT security, local user management can be used to individually restrict F-Configuration and F-Program access for users. Table 3- 5 Fail-safe CPUs Performance segment PROFIBUS PROFINET PROFINET Basic Work Pro- interfaces IO RT/IRT IO RT PROFINET memory cessing...
  • Page 22 Product overview 3.2 Application Performance segment PROFIBUS PROFINET PROFINET Basic Work Pro- interfaces IO RT/IRT IO RT PROFINET memory cessing interfaces interface functional- time for bit oper- ations CPU 1518F- Fail-safe CPU for high- 119* MB 1 ns 4 PN/DP MFP performance applica- tions, demanding com- munication tasks, very...
  • Page 23 DIN rail is implemented in the rail of the SIMATIC S7-1500. The CPUs of the SIMATIC S7-1500 product series can be expanded centrally and in a modular fashion with signal modules. Space-saving expansion enables flexible adaptation to each application.

  • Page 24: Hardware Properties

    Product overview 3.3 Hardware properties Hardware properties Article number 6ES7513-1AM03-0AB0 View of the module The following figure shows the CPU 1513-1 PN. Figure 3-1 CPU 1513-1 PN Note Protective film Note that a protective film is attached to the display of the CPU when shipped from the factory.
  • Page 25 The CPU 1513-1 PN has the following technical properties: Property Description Additional information CPU display All CPUs of the SIMATIC S7-1500 product series feature • S7-1500, ET 200MP system man- a display with plain text information. The display pro- vides information on order numbers, firmware version (http://support.automation.sieme...

  • Page 26: Firmware Functions

    The system automatically generates the alarms for Diagnostics function manual nostics system diagnostics and outputs the alarms via a pro- (https://support.industry.siemens.co gramming device/PC, HMI device, the web server or the m/cs/ww/en/view/59192926) integrated display. System diagnostics information is also available when the CPU is in STOP mode.
  • Page 27 Configuration control The configuration control allows you to handle different S7-1500, ET 200MP system manual real hardware configurations with a maximum hard- (https://support.industry.siemens.co ware configuration. Especially in series machine manu- m/cs/ww/en/view/59191792) facturing, this means that you have the option of operating/configuring different expansion variants of a machine within a single project.
  • Page 28 S7-1500 CPUs support the controlled positioning and S7-1500T Motion Control function traveling of axes via S7-1500 Motion Control functions manuals by means of the following technology objects: (https://support.industry.siemens.co m/cs/ww/en/view/109751049) Speed axes, positioning axes, synchronous axes, exter- nal encoders, output cams, cam tracks, and measuring inputs.
  • Page 29 Know-how protection The know-how protection protects user blocks against S7-1500, ET 200MP system manual unauthorized access and modifications. (https://support.industry.siemens.co m/cs/ww/en/view/59191792) Copy protection Copy protection links user blocks to the serial number of the SIMATIC Memory Card or to the serial number of the CPU.

  • Page 30: Operating And Display Elements

    Product overview 3.5 Operating and display elements Operating and display elements 3.5.1 Front view of the CPU with closed front panel The figure below shows the front view of the CPU 1513-1 PN. ① LEDs for the current operating state and diagnostic status of the CPU ②...
  • Page 31 (local lock) and assign a password for the display. You can find additional information on the display, configurable protection levels and local locks in the S7-1500/ET 200MP (http://support.automation.siemens.com/WW/view/en/59191792) system manual. CPU 1513-1 PN (6ES7513-1AM03-0AB0) Equipment Manual, 11/2023, A5E40881673-AD...

  • Page 32: Front View Of The Cpu Without Front Panel And View From Below

    3.5 Operating and display elements Reference You will find detailed information on the individual display options, a training course and a simulation of the available menu commands in the SIMATIC S7-1500 Display Simulator (https://support.industry.siemens.com/cs/ww/en/view/109761758). 3.5.2 Front view of the CPU without front panel and view from below The following figure shows the operator controls and connection elements of the CPU 1513-1 PN.
  • Page 33 Note Removing the display Only remove the display if it is faulty. You can find information on removing and replacing displays in the S7-1500, ET 200MP system manual (https://support.industry.siemens.com/cs/ww/en/view/59191792). ① Slot for the SIMATIC memory card ② PROFINET IO interface (X1) with 2 ports ③...

  • Page 34: Rear View Of The Cpu

    Product overview 3.5 Operating and display elements 3.5.3 Rear view of the CPU The following figure shows the connection elements on the back of the CPU 1513-1 PN. ① Shield contact surface ② Plug-in connection for power supply ③ Plug-in connection for backplane bus ④...

  • Page 35: Operating Mode Buttons

    (this takes three seconds). After You can find additional information in the S7- this, release the button. 1500/ET 200MP system manual 3. Press the STOP mode button again (https://support.industry.siemens.com/cs/ww/en/v iew/59191792). within the next three seconds. CPU 1513-1 PN (6ES7513-1AM03-0AB0) Equipment Manual, 11/2023, A5E40881673-AD...

  • Page 36: Connecting Up

    Connecting up This section provides information on the terminal assignment of the individual interfaces and the block diagram of the CPU 1513-1 PN. 24 V DC supply voltage (X80) The connector for the power supply is plugged in when the CPU ships from the factory. The following table shows the signal names and the descriptions of the pin assignment of the 24 V DC supply voltage.
  • Page 37 You need a screwdriver (max. blade width 2.5 mm) to remove the PROFINET plug. Remove display You can find a description of how to remove and replace the display in the S7-1500, ET 200MP system manual (http://support.automation.siemens.com/WW/view/en/59191792). Reference You can find additional information on the topics of "Connecting the CPU" and "Accessories/spare parts"...
  • Page 38 Connecting up The table below shows how the MAC addresses are assigned. Table 4- 2 Assignment of the MAC addresses Assignment Labeling MAC address 1 PROFINET interface X1 • Front, lasered (visible in STEP 7 for accessible devices) • Right side, lasered (start of number range) MAC address 2 Port X1 P1R (required for LLDP, for...
  • Page 39 Connecting up Block diagram The following figure shows the block diagram of the CPU 1513-1 PN. ① CPU with control and operating mode X80 24 V DC Infeed of supply voltage buttons ② Electronics 24 V DC supply voltage ③ PROFINET 2-port switch Ground ④...

  • Page 40: Interrupts, Error Messages, Diagnostics And System Alarms

    The status and error displays of the CPU 1513-1 PN are described below. You will find additional information on "Interrupts" in the STEP 7 online help. You can find additional information on the topics of "Diagnostics" and "System alarms" in the Diagnostics (http://support.automation.siemens.com/WW/view/en/59192926) function manual. Status and error display of the CPU LED display The figure below shows the CPU 1513-1 PN LEDs.
  • Page 41 Interrupts, error messages, diagnostics and system alarms 5.1 Status and error display of the CPU Meaning of the RUN/STOP, ERROR and MAINT LEDs The CPU 1513-1 PN has three LEDs for displaying the current operating state and diagnostic status. The following table shows the meaning of the various combinations of colors for the RUN/STOP, ERROR and MAINT LEDs.
  • Page 42 Interrupts, error messages, diagnostics and system alarms 5.1 Status and error display of the CPU Meaning of LINK RX/TX LED Each port has a LINK RX/TX-LED. The table below shows the various "LED scenarios" of the ports for the CPU 1513-1 PN. Table 5- 2 Meaning of the LEDs LINK TX/RX LED...
  • Page 43 Interrupts, error messages, diagnostics and system alarms 5.1 Status and error display of the CPU Meaning of the STOP ACTIVE LED The following table shows the meaning of the STOP ACTIVE LED for the CPU 1513-1 PN. Table 5- 3 Meaning of the LEDs STOP ACTIVE LED Meaning...

  • Page 44: Technical Specifications

    Technical specifications The following table shows the technical specifications as of 11/2023. You will find a data sheet including daily updated technical specifications on the Internet (https://support.industry.siemens.com/cs/ww/en/pv/6ES7513-1AM03-0AB0/td?dl=en). Article number 6ES7513-1AM03-0AB0 General information Product type designation CPU 1513-1 PN HW functional status...
  • Page 45 Technical specifications Article number 6ES7513-1AM03-0AB0 Power Infeed power to the backplane bus 10 W Power consumption from the backplane bus (bal- 5.5 W anced) Power loss Power loss, typ. 3.4 W Memory Number of slots for SIMATIC memory card SIMATIC memory card required Work memory 600 kbyte •...
  • Page 46 Technical specifications Article number 6ES7513-1AM03-0AB0 600 kbyte • Size, max. • Number of free cycle OBs • Number of time alarm OBs • Number of delay alarm OBs 20; With minimum OB 3x cycle of 250 µs • Number of cyclic interrupt OBs •...
  • Page 47 Technical specifications Article number 6ES7513-1AM03-0AB0 Data areas and their retentivity Retentive data area (incl. timers, counters, flags), 256 kbyte; in total; available retentive memory for max. bit memories, timers, counters, DBs, and technol- ogy data (axes): 216 KB Extended retentive data area (incl. timers, coun- 2.5 Mbyte;...
  • Page 48 Technical specifications Article number 6ES7513-1AM03-0AB0 PtP CM the number of connectable PtP CMs is only limited • Number of PtP CMs by the number of available slots Time of day Clock Hardware clock • Type 6 wk; At 40 °C ambient temperature, typically •...
  • Page 49 Technical specifications Article number 6ES7513-1AM03-0AB0 PROFINET IO Controller Services – Isochronous mode – Yes; Requirement: IRT and isochronous mode Direct data exchange (MRPD optional) – – Yes; per user program PROFIenergy – Yes; Max. 32 PROFINET devices Prioritized startup – 128;...
  • Page 50 Technical specifications Article number 6ES7513-1AM03-0AB0 PROFINET IO Device Services – Isochronous mode – – Yes; per user program PROFIenergy – Shared device – Number of IO Controllers with shared de- vice, max. – Yes; per user program activation/deactivation of I-devices –...
  • Page 51 Technical specifications Article number 6ES7513-1AM03-0AB0 SIMATIC communication Yes; encryption with TLS V1.3 pre-selected • PG/OP communication • S7 routing • Data record routing • S7 communication, as server • S7 communication, as client See online help (S7 communication, user data •...
  • Page 52 Technical specifications Article number 6ES7513-1AM03-0AB0 OPC UA Yes; "Small" license required • Runtime license required Yes; Data Access (registered Read/Write), Method • OPC UA Client Call – Application authentication – Available security policies: None, Basic128Rsa15, Security policies Basic256Rsa15, Basic256Sha256 – "anonymous"...
  • Page 53 Technical specifications Article number 6ES7513-1AM03-0AB0 – 200 ms Publishing interval, min. – Number of server methods, max. – Number of inputs/outputs per server method, max. – 4 000; for 1 s sampling interval and 1 s send in- Number of monitored items, recommend- terval ed max.
  • Page 54 Technical specifications Article number 6ES7513-1AM03-0AB0 Status/control • Status/control variable Inputs/outputs, memory bits, DBs, distributed • Variables I/Os, timers, counters • Number of variables, max. – 200; per job of which status variables, max. – 200; per job of which control variables, max. Forcing •...
  • Page 55 Technical specifications Article number 6ES7513-1AM03-0AB0 Supported technology objects Motion Control Yes; Note: The number of technology objects affects the cycle time of the PLC program; selec- tion guide via the TIA Selection Tool 1 120 • Number of available Motion Control resources for technology objects •...
  • Page 56 336 g General technical specifications You can find information on the general technical specifications, such as standards and approvals, electromagnetic compatibility, protection class, etc., in the S7-1500, ET 200MP (http://support.automation.siemens.com/WW/view/en/59191792) system manual. CPU 1513-1 PN (6ES7513-1AM03-0AB0) Equipment Manual, 11/2023, A5E40881673-AD...

  • Page 57: Dimensional Drawing

    Dimensional drawing This section includes a dimensional drawing of the module on a mounting rail and a dimensional drawing with the front panel open. Always observe the specified dimensions for installation in cabinets, control rooms, etc. Dimensional drawings for CPU 1513-1 PN Figure A-1 Dimensional drawing of CPU 1513-1 PN, front and side views Figure A-2...

This manual is also suitable for:

Cpu 1513-1 pn

Table of Contents