Machine Information Menu; Status Menu - Sony PCS-11 Operating Instructions Manual

Machine Information Menu

The Machine Information menu shows the
versions of the Communication Terminal
and the connected equipment for exclusive
use, installed software versions, etc.
Machine Information
Host Version
ISDN UNIT Version
DSP Version
Software Option
Option I/F
Host Name
IP Address
MAC Address
Serial Number
Host Version
Displays the software version of the
Communication Terminal.
ISDN UNIT Version
Displays the version of the connected
PCSA-B384S or PCSA-B768S ISDN Unit.
DSP Version
Displays the version of the built-in DSP
(Digital Signal Processor) for audio/video
codec.
Software Option
Displays the optional software installed.
Non: No optional software is installed.
SIP: The PCSA-SP1 SIP software is
installed.
Option I/F
Displays the optional connected equipment.
None: No optional equipment is connected.
ISDN UNIT (B384S/B768S): The PCSA-
B384S or PCSA-B768S ISDN Unit is
connected.
Host Name
Displays the host name.
IP Address
Displays the IP address.
MAC Address
Displays the MAC address.
Serial Number
Displays the serial number.
54
Registering Local Information
VerX.XX
VerX.XX
VerX.XX
SIP
ISDN UNIT (B384S)
PCS-11
0.0.0.0
00-00-00-00-00-00
12345
End

Status Menu

The Status menu shows the current status of
communication.
The ISDN Line Status, LAN Line Status or
LAN Connection Status will also be
displayed depending on the line interface
used.
Communication Status
The items below are shown both in the
columns for "Encode" and "Decode". The
descriptions under "Encode" show the
setting status on the local system and those
under "Decode" show the status on
receiving.
Status
Page: 1/4
Communication Status
(Encode) (Decode)
Audio Mode G.728 G.728
Video Mode H.261CIF H.261CIF
Frame Rate 15fps 15fps
Rate 2 x 64k 2 x 64k
MLP Rate OFF OFF
HMLP Rate OFF OFF
LSD Rate 6400 6400
Check Code: 87F02D202D62C0C4
Audio Mode
Shows the current audio compression
format.
Video Mode
Shows the current video compression
format.
Note
The audio compression and video compression
formats used for communication with a remote
party may differ from the settings in this menu,
depending on the status of videoconferencing
system on the remote site.
Frame Rate
Shows the maximum frame rate of motion
pictures.
Rate
Displays the number of lines connected and
a transmission rate during communication.
Connection A
Line I/F BRI
Camera Control ON
Data Control ON
H.239 Presen ON
Cancel