Switching The Picture Displayed On The Tv Monitor; Switching The Sound To Be Sent To The Remote Party - Sony PCS-11 Operating Instructions Manual

Switching the Picture Displayed on the TV Monitor

Each press of the DISPLAY button on the Remote Commander switches the
picture displayed on the monitor screen as follows:
Notes
• A still image is displayed only when it has been transmitted or received.
• A picture from a computer (RGB picture) or picture on a whiteboard is displayed only
when it is received.
• As a computer picture (RGB picture) is output by being converted into a 4CIF signal,
the picture cannot be obtained in its original high resolution and the details cannot be
clearly seen. The number of frames displayed per second depends on the transmission
rate, for example, one frame per second at 1 Mbps.

Switching the Sound to Be Sent to the Remote Party

You can switch the sound sent to the remote party between the sound from the
microphone and that from the connected equipment. Use "Input Select" in the
Audio Setup menu.
For details on the "Input Select" setting, see page 44.
102
Selecting the Input Picture and Sound
Picture by the local or remote site
DISPLAY button
Still image transmitted or
received
Picture from a computer (RGB picture)
received
Picture on a whiteboard received