Identify A User - Sony PCS-11 Operating Instructions Manual

Identify a User

Once you reach the Web page, the following window will be displayed asking
you to identify yourself as the user.
Enter one of the following user names (see below) into the "User Name" box
and the corresponding password into the "Password" box, then click the [OK]
button.
Each character of a password is shown as "*" on the screen. When the user
name and password are correct, the "Dial/Disconnect" page will come up. If
an incorrect user name or password is entered three times, an error message
appears on the screen.
Notes on the user name and the password
• When you enter "user" in the "User Name" box and then its password (Remote
Access Password) in the "Password" box, you can access and check the "Phone
Book" and "Setup" pages.
• When you enter "super" in the "User Name" box and then its password (Superuser
Password) in the "Password" box, you can access the "Phone Book" page, change the
setting of the page, and register a new entry onto the page. And you can check the
"Setup" page.
• When you enter "sonypcs" in the "User Name" box and then its password
(Administrator Password) in the "Password" box, you can access the "Phone Book"
page, change the setting of the page, and register a new entry onto the page. And you
can check and modify the "Setup" page.
• If the corresponding password is not assigned, leave the "Password" box blank and
click the [OK] button.
• Administrator Password, Superuser Password and Remote Access Password settings
are in the Administrator menu.
159
Identify a User