Activating Autodos - Miele G7966SCVI Operating Instructions Manual

Activating AutoDos

The display changes to the settings
screen for AutoDos (see "Automatic dis-
pensing/AutoDos" under "Detergent").
Even if you do not wish to use Auto-
Dos, you must remove the transport
locking device from the PowerDisk
compartment before running the first
program (see "Activating AutoDos"
under "Detergent").
You can activate AutoDos.
If you do not wish to use AutoDos, you
can manually dispense the detergent
via the detergent compartment (see
"Manual detergent dispensing" under
"Detergent").
 Select the setting you want and con-
firm with OK.
This setting applies to all programs and
you can change it in a program's Op-
tions menu.
Before using for the first time
Finally, prompts will appear in the dis-
play.
After confirming these prompts with
OK, the messages 
the "QuickIntenseWash" program with the
"Express" option without a load
may appear.
fill rinse aid
 Add salt and rinse aid if necessary
(see "Reactivation salt" and "Rinse
aid" under "Before using for the first
time").
 Select OK to confirm the messages.
The selected program will be shown
briefly in the display.
The display will then show the esti-
mated program duration for the pro-
gram selected.
Refill salt and start
and 
Re-
27