Spray Arm Fault - Miele G7966SCVI Operating Instructions Manual

Spray arm fault

Problem
During the program and
at the end of the pro-
gram, the display shows
the following message:
Check spray arms
The dishwasher does
not turn off at the end
of the program.
The dishware may not
be clean because no
detergent was dis-
pensed. The AutoDos
function is automati-
cally deactivated during
the program sequence.
Frequently asked questions
Possible cause and solution
The lower spray arm is blocked or the nozzles of the
lower spray arm are clogged. The AutoDos function
is automatically deactivated during the program be-
cause the AutoDos detergent outlet cannot be com-
pletely flushed out.
 Turn the dishwasher off and back on again.
Messages appear in the display.
 Perform a rotation check of the lower spray arm
and rearrange the wash items if they are blocking
the spray arm.
 Clean the lower spray arm (see "Cleaning the
spray arms" under "Cleaning and care").
 Select OK to confirm each message.
 Start the program again.
105