Installing Scanner On Mac - Plustek OpticFilm 8100 User Manual

Installing Scanner on Mac
Attention
If it is necessary, you may install the Mac driver from the Setup/Application CD‐ROM.
Insert the Setup/Application CD‐ROM, included with your scanner, into your CD‐ROM
drive.
You do not have to install any scanner drivers when installing
the scanner under Mac OS. The scanner drivers are already
included within the SilverFast installation.
Please refer to Bundled SilverFast Software
installing the bundled SilverFast software. You may refer to
Scan with the SilverFast Application for software operation.
Scanner panel quick launch button functions are not available
on Mac OS.
1. Double‐click on the setup file [Plustek Film
Scanner]
to guide you through the installation. Follow the
on‐screen guide in the installer window.
2. You will be prompted to enter your Mac
administrator password in the way. Enter the
password to continue the installation. Note: Only
the Mac administrator can perform the
installation. Please make sure that you log in the
Mac OS as an administrator.
3. When the installation finishes, click on [Close] to
exit the installer.
4. Press the Power button to turn the scanner ON.
, and the Scanner Installer will start
10
installation for