Download Print this page

Samsung CNH HDB Series Technical Data Book page 110

Single, low ambient line up for america r410a, cooling only
Hide thumbs Also See for CNH HDB Series:

Advertisement

Installation
Outdoor Units
CAUTION
• Make sure that the wall can support the weights of the
rack and the outdoor unit.
• Install the rack close to the column as much as possible.
• When installing an air guide duct, be sure to check the
following:
– The screws do not damage the copper pipe.
– The air guide duct is fixed firmly on the guard fan.
Connecting the power cables,
communication cable, and controllers
You must connect th e following three electrical cables to
the outdoor unit:
• The main power cable between the auxiliary circuit
breaker and the outdoor unit.
• The outdoor-to-indoor power cable between the
outdoor unit and the indoor unit.
• The communication cable between the outdoor unit
and the indoor unit.
CAUTION
• During installation, make first the refrigerant
connections and then the electrical connections. If the
unit is being removed, first disconnect the electrical
cables and then the refrigerant connections.
• Connect the air conditioner to the earthing system
before making the electrical connections.
Connecting wire conduits
When connecting cables between the indoor unit and the
outdoor unit, use conduits to protect the cables.
1 Drill holes on the conduit plate in accordance with
their use and quantity.
• AC018/024BXSCCC
– Drill conduit holes on the side cabinet. (knock
out holes)
2 Insert the cables through the conduits, and then fix the
3 Apply silicone to the end of the hose to prevent rain
4 Connect the cables to the outdoor units.
5 Attach the conduit plate to the product.
Air conditioning system examples
When using earth leakage circuit breaker (ELCB) for a
single phase
※ The appearance of the unit may be different from the
• If the outdoor unit is installed in a location vulnerable
Conduit Holes
• AC030/036BXSCCC
– Use a nipper to remove conduit holes from th e
lower part of the cabinet.
(Do not remove it by hammering.)
conduits to the conduit plate with the lock nuts.
from entering the hose.
Conduit inserted into the outdoor unit
For how to connect the cables, refer to the next page.
Main power
cable
MCCB
ELB
1
OR
ELCB
1
Outdoor Unit
picture depending on the model.
CAUTION
to an electric leak or submergence, make sure to
install an ELCB.
Conduit Holes
Silicone
Communication cable
Outdoor-to-indoor power cable
Earthing
Indoor Unit

Hide quick links:

Advertisement

loading