Connecting The Hoses - Samsung FT-MF User Manual

Microfiber filter
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
1.
Remove the films on both sides of the anti-slip pad, and then
attach the anti-slip pad to the bottom of the cradle.
NOTE
You must attach the smooth side of the anti-slip pad to the cradle.
2.
Attach the cradle on the rear-left or rear-right side of the
washing machine's top surface.
3.
Connect the hoses to the Microfiber filter according to the
instructions in the "Connecting the hoses" section.
4.
Align the holes on the bottom of the Microfiber filter with the
grooves on the cradle, and then mount the Microfiber filter.
5.
Plug the power cord into a wall socket.
NOTE
The power turns on and the Filter status indicator lights up when you
plug the power cord into a wall socket.

Connecting the hoses

1.
Connect the washing machine's drain hose to the water inlet port
(IN) of the Microfiber filter.
CAUTION
-
Make sure the washing machine is off before connecting the
washing machine's drain hose to the water inlet port (IN).
-
Some water may remain in the washing machine's drain
hose. Be careful when you connect it to the Microfiber filter.
2.
Connect the provided drain hose to the water outlet port (OUT).
3.
Firmly fix the hoses with the provided hose clamps.
DC68-04471B-00_IB_FT-MF_EU_EN_DE_NL_FR_IT_ES_PT_DA_FI_NO_SV_PL_HU_EL_RO_BG_LT_LV_ET_CS_SK_HR_TR.indb 7
O U T
I N
CAUTION
Do not stretch the drain hose by force. If the hose is too short, replace
the hose with a longer, high-pressure hose.
Using the hose connector and adapter
If you cannot connect your washing machine's drain hose to the
water inlet port (IN) because of the unmatching size, use the hose
connector and adapter according to the following instruction.
O U T
IN
1.
Connect the hose connector to the water inlet port (IN).
2.
Find the right-sized adapter for your washing machine's drain
hose, and then connect it to the hose connector.
3.
Firmly fix both ends of the hose connector with the provided
hose clamps.
4.
Connect your washing machine's drain hose to the adapter.
5.
Operate the washing machine for one full cycle to check for
water leaks.
English  7
2023-06-07
5:52:09

Advertisement

Table of Contents
loading

Table of Contents