Hose Connection - Samsung FT-MF User Manual

Installation

Hose connection

Install the product in a location where you can connect your Samsung
washing machine's drain hose to the Microfiber filter, and the drain
hose to the drain system at the same time.
To reduce the risk of leaks:
• Use the provided hose clamps to firmly fix the hoses connected
to the water inlet (IN) and outlet (OUT) ports.
• Regularly check the hose connections for leaks.
CAUTION
Before using the Microfiber filter for the first time, check all hose
connections for leaks.
Wall (when mounted on a wall)
Install the Microfiber filter on a solid and flat wall.
When installing the Microfiber filter on a wall, use a level and make
sure it is level.
CAUTION
• Choose a wall where you can use the provided anchor bolt to
fasten the bracket (such as a concrete or cement walls).
• If you install your Microfiber filter on a wall made of other kinds
of material, use a proper anchor bolts and screws designed for
that material.
Installing the Microfiber filter
You must install the Microfiber filter in the upright position.
Installing on a wall
NOTE
To install the Microfiber filter on a wall, you need a drill and a cross-
head screwdriver. (Not provided)
1. Decide where on the wall you want to install the Microfiber filter.
- The minimum distance (*) from the floor to the bottom of
the Microfiber filter must be 100 ± 5 cm.
CAUTION
You must install the product higher than the washing machine,
and the product's water outlet port (OUT) must point down.
6 English
DC68-04471B-00_IB_FT-MF_EU_EN_DE_NL_FR_IT_ES_PT_DA_FI_NO_SV_PL_HU_EL_RO_BG_LT_LV_ET_CS_SK_HR_TR.indb 6
2. Hold the cradle against the installation location and mark the
spots where the screws will be fastened.
3. Drill holes in the spots you have marked in the previous step, and
then insert the anchor bolts.
4. Attach the cradle to the wall with long screws.
5. Attach the bracket to the Microfiber filter. Use the short screws
and fasten them at the bottom of the Microfiber filter.
6. Align the holes on the bracket with the grooves on the cradle,
and then mount the bracket.
CAUTION
- Be careful not to damage the Microfiber filter while
attaching the bracket or mounting to the cradle.
- Make sure to check the Microfiber filter is securely fastened
to the cradle
7. Connect the hoses to the Microfiber filter according to the
instructions in the "Connecting the hoses" section.
8. Plug the power cord into a wall socket.
NOTE
The power turns on and the Filter status indicator lights up when you
plug the power cord into a wall socket.
Installing on a washing machine
NOTE
Before the installation, keep the top, sides, and rear of the washing
machine clear of interfering objects.
2023-06-07 5:52:08