Resetting The Ti-86; The Mem Reset (Reset) Menu; Clrent (Clear Entry) - Texas Instruments TI-86 Manual Book

232
Chapter 17: Memory Management
Before resetting all memory,
consider deleting selected
information to increase
memory capacity (page 231).
When you select and confirm
or , the default
ALL DFLTS
contrast is reset; to adjust it,
use - $ or - #
(Chapter 1).

Resetting the TI-86

The MEM RESET (Reset) Menu

RAM DELET RESET
ALL MEM DFLTS
When confirmed, all data is cleared and memory is reset; both messages are displayed
ALL
MEM When confirmed, clears all stored data from memory;
DFLTS When confirmed, resets all defaults;
When you select ,
ALL MEM
is displayed.
To confirm the selected reset, select
To cancel the selected reset, select
- ™ *

ClrEnt (Clear Entry)

The TI-86 retains as many previous entries as possible in
, up to a capacity of 128 bytes.
ENTRY
To clear the storage area of all entries, execute
ENTRY
on a blank line on the home screen (- ™ * b).
- ™ (
TOL ClrEnt
Defaults Set
, or , a confirmation menu
DFLTS
(press )).
YES
(press *).
NO
Mem Cleared is displayed
is displayed
ClrEnt