Hitachi airPoint Room700 Operation Manual page 46

6. Screen Display Setting
Step3. Press " " or " " to select "yyyy/mm/dd/hh/mm".
Press " " or " " to change the setting.
Step4. After making all settings,
If select "
If press" ", the confirmation screen is displayed.
Select "Save" and press "OK" to confirm the setting and
the screen returns to Step2.
Select "Not Save", it returns to Step2 without any setting
changes.
If press " " again, it returns to Step3.
6.1.2 Time Format
1. Set time format
Step1. Select "Adjusting Date/Time" on the "Screen Display
Setting" screen and press "OK".
Step2. Press " " or " " to select "Time Format" and press "OK".
Step3. Press " " or " " to select 24 hour or 12 hour and press
"OK".
Press " " to return to Step2.
6.1.3 Daylight Savings Time
This function adjusts time forward or backward an hour when
daylight savings time starts or ends.
1. Set daylight savings time
Step1. Select "Daylight Savings Time" on the "Adjusting
Date/Time" screen and press "OK".
Step2. Press " " or " " to select the setting and press "OK".
NOTE:
•
In the same refrigerant system, this function can be set only on one
wired remote controller. Once set, the function is automatically
synchronized to the other wired remote controllers. Therefore, in
the same refrigerant system, you do not need to set this function
on multiple wired remote controllers simultaneously.
44
" and press "OK", the screen returns to Step2.
OK
Adjusting Date/Time
2020 06 01 00
Y M D H
Select OK to confirm
Screen Display Setting
Adjusting Date/Time
Run Indicator Brightness
Display Adjustment
Temperature
Language Setting
OK Select
Adjusting Date/Time
Adjusting Date/Time
Time Format (AM/PM or 24Hour)
Daylight Savings Time
Select
OK
Time Format
24Hour (11:04)
12Hour (11:04 AM)
Select
OK
Adjusting Date/Time
Adjusting Date/Time
Time Format (AM/PM or 24Hour)
Daylight Savings Time
Select
OK
Daylight Savings Time
Not Set
Put 1h forward
Put 1h backward
Select
OK
A16381H9HL
19
OK
M
Back
(Mon) 16:30
Back
(Mon) 16:30
Back
Back
(Mon) 16:30
Back
Back