Optional Components; External Braking Resistor - Siemens SINAMICS G115D Operating Instructions Manual

Overview of the SINAMICS G115D drive
3.4 Optional components
Australia and New Zealand (RCM formerly C-Tick)
The converters and motors showing the test symbols fulfill the EMC requirements for
Australia and New Zealand.
China RoHS
The converters and motors comply with the requirements of China RoHS. You can find
additional information on the Internet:
Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
Standards that are not relevant
China Compulsory Certification
The SINAMICS G115D converters and the SIMOGEAR 2KJ8 geared motors do not fall in the
area of validity of the China Compulsory Certification (CCC).
China Energy Label and Bureau of Indian Standards (BIS) Certification
The SIMOGEAR 2KJ8 geared motors are designed exclusively for converter operation, and the
rated frequency of the 2KJ8 asynchronous motors is not 50 Hz; therefore, they do not fall in
the area of validity of the Indian standard IS 12615:2018 and the China national standards
GB 18613-2020 and CEL 007-2021.
Certificates for download
You can find all relevant certificates for download on the Internet:
3.4

Optional components

3.4.1

External braking resistor

The optional external braking resistor can be used to convert the regenerative energy produced
by the motor into heat, thus giving greatly improved braking and deceleration capabilities.
34
China RoHS (https://support.industry.siemens.com/cs/ww/en/view/109738656)
Certificates (https://support.industry.siemens.com/cs/us/en/ps/27867/cert)
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA