Parts Identification; How To Assemble; How To Fill Water - Panasonic NI-GSG060 Operating Instructions Manual

PARTS IDENTIFICATION

Steamer head
Steamer holder
Hanger
Telescopic
pole
Lock button
Plug hook
Fixing nut
Water reservoir
Power button
Power cord
Power indicator
light
Power base
Power plug Plug type may vary comply with
respective country or region requirement.
08
Steamer head Steam selector
Nozzle
Hook
Steam
selector
Holder
Shaded area represents
the hand-held area.
Water Reservoir
Hose
Close
Water
reservoir
handle
Power base Accessories
Telescopic
pole hole
Hose hole
(Use for pulling the garment
tight with one hand while
ironing with the other hand.)

HOW TO ASSEMBLE

Be sure to assemble the product on a flat
and stable floor.
1. Insert the telescopic pole into the
telescopic pole insertion on the power base
correctly, until a "click" spring lock sound
is heard.
2. 1 Align the hole of the hook on the
telescopic pole, and then push
with force the hook into the
telescopic pole, make sure the
Cap
spring lock into the small hole
Open
on the hook.
2 Release the lock button on the
Water inlet
telescopic pole, pull the telescopic
pole upward to maximum height,
Water
reservoir and then lock the lock button.
3. Install the hose at the hose hole of
power base and then turn the fixing
nut clockwise to tighten until a "click"
sound is heard.
Glove
4. Place the steamer head into the steamer
holder on the telescopic pole.

HOW TO FILL WATER

The plug must be removed from the socket outlet
before the water reservoir is filled with water.
1. Remove the water reservoir from power base.
2. Open the cap on the bottom of the water reservoir.
1
Put the water reservoir under a faucet and fill it with
2
proper amount of water.
spring Close the cap correctly.
3
lock
2
1
1
3. Attach firmly the water reservoir
back to the power base.
spring
lock
2
Notes:
a) The water reservoir capacity is approx. 1.5 L, which is
below the water inlet. Fill it with proper amount of water
1
according to your need.
b) Please fill the water reservoir with tap water. In case you
live in an area with hard water, scales build-up quickly may
occur so we recommend using distilled water or purified
water.
c) When filling water, accumulating water may occur in the
groove around the water inlet and the water reservoir which
is not a malfunction. Please clean any water in the groove
before installing the water reservoir back.
3
09