Using The Garment Steamer; After Use; Cleaning; Scales Cleaning - Panasonic NI-GSG060 Operating Instructions Manual

USING THE GARMENT STEAMER

1. Hang clothes to be ironed on
hangers or hang it with a
hanger on the hanger hook.
Insert the power plug into
the household outlet.
2. Press the power button to light the power indicator up.
3. Wait about 1 minute when the product is ready to use.
And set the steam selector according
to the required " " / " " steam.
When gripping the
steamer head,
hold the handle.
Shaded area represents the hand-held area.
4. Steaming the clothes. We recommend to put the steam
head into the steamer holder when you sort out or change
your clothes.
5. Turn off the power when you have finished using, unplug
the power plug.
10
Notes:
a) When the hose slacken, the steam will be clogs partially
with noise from hose.
b) Do not remove the water reservoir and hose from the base
during use.
c) To close steam, turn off the power button.
d) There may be water dripping from nozzle on the clothes,
this is not a malfunction.
e) Insulated glove can be worn on the hand taking the cloth in
order to smooth wrinkles when ironing.
f ) Turn off the power button, unplug the power plug
when you take out the water reservoir from the
power base.

AFTER USE

1. Drainage, Cleaning and Maintenance of
the water reservoir
1 Turn off the power button, unplug the power plug.
After 1 hour, take out the water
2
2
tank from the power base, open
the cap, shake the water reservoir
to clean its inner wall with the
remaining water and then drain
the water reservoir.
2. Storage
1
Place the steamer head into the
1
steamer holder.
2 Set the steam selector
to the " " position.
2
3 Hold the telescopic pole to move
the product,and store the product
in a safe place.
4
4 Store the product when the
hose is straight.
Note:
With the telescopic pole being retracted, the
hose will become bent, and then will interfere
with movement of product. Therefore, before
retracting the telescopic pole, please place
and store the product in a safe place as shown
in the figure.

CLEANING

Cleaning and Maintenance of the steamer head and power
base and the hose.
1 Unplug the power plug, wait until the steamer head,
steamer holder and power base have fully cooled down.
2 Wipe the surface of the nozzle
and the power base with a soft cloth.
For stubborn stains, use a soft cloth
dipped with neutral detergent to clean.
Remove the hose, clean up stains at
3
the hose interface and with the base
and the pole.

SCALES CLEANING

To maintain optimal steam performance, it is important to
remove scales and impurities inside the appliance regularly.
It is recommended to perform the easy rinse calc-clean process
at least once a month.
1 Unplug the power plug, wait until the steamer head,
steamer holder and power base have fully cooled down.
2 Remove the telescopic pole, hose, and water reservoir
from the power base.
3 Pour the water in power base out from the hose hole (as
shown in the figure).
4 Place the power base on a horizontal
place, install the water reservoir containing
water on the power base, leave them for
about 10 seconds, and then
remove the water reservoir.
Hose hole
5 Pour the water in power base
out from the hose hole (as shown
in the figure).
11