Parts Identification; How To Assemble; How To Fill Water - Panasonic NI-GSE050 Operating Instructions Manual

PARTS IDENTIFICATION

Steamer head
Hook
Steamer holder
Telescopic
pole
Lock button
Handle
(NI-GSE050 only)
Power button
Power indicator
light
Power cord
Power base
Power
plug
Plug type may vary comply with respective country or
08 region requirement.
Steamer head
Nozzle
Steam
selector
Holder
Shaded area represents
the hand-held area.
Water tank
Cap
Hose
Close Open
Water tank
handle
Water inlet
Water tank
Power base Accessory
Telescopic
Fixing nut
pole hole
Water tank
Hose hole

HOW TO ASSEMBLE

Steam selector
Be sure to assemble the product on a flat
and stable floor.
1. Insert the telescopic pole into the
telescopic pole
correctly, until a "click" spring lock sound
is heard.
2. 1 Align the hole of the hook on the
telescopic pole, and then push
with force the hook into the
telescopic pole, make sure the
spring lock into the small hole
on the hook.
2 Release the lock button on the
telescopic pole, pull the telescopic
pole upward to maximum height,
and then lock the lock button.
2
3. Install the hose at the hose hole of
power base and then turn the fixing
nut clockwise to tighten until a "click"
sound is heard.
4. Place the steamer head into the steamer
holder on the telescopic pole.
Hanger
(NI-GSE050 only)

HOW TO FILL WATER

The plug must be removed from the socket outlet
before the water tank is filled with water.
1. Remove the water tank from power base.
2.
1
insertion on the power base
2
spring 3
lock
1
3. Attach firmly the water tank back to the power base.
spring
lock
Note:
a) The water tank capacity is approx. 2 L, which is below the
water inlet. Fill it with proper amount of water according to
your need.
b) Please fill the water tank with tap water. In case you live in
an area with hard water, scales build-up quickly may occur
so we recommend using distilled water or purified water.
c) When filling water, accumulating water may occur in the
groove around the water inlet and the water tank which is
not a malfunction. Please clean any water in the groove
before installing the water tank back.
Open the cap on the bottom of the water tank.
Put the water tank under a faucet and fill it with proper
amount of water.
Close the cap correctly.
2
1
3
09