Operating Mower; Pto Switch - Kubota Z122E Operator's Manual

4. Lower the mower deck by pushing the mower lift pedal
again. This lowers the mower deck from the
"TRANSPORT" position
position.
5. Adjust the anti-scalp rollers' height as recommended
below for normal operating condition.
A Never allow roller to contact the ground continuously
as premature roller wear may develop if set
incorrectly.
A Anti-scalp rollers must maintain a minimum clearance
of 6 mm (1/4 in.) to the ground.
[BOLT]
(1) Anti-scalp roller (Front, bolt shift type)
A Operation of the mower deck in "TRANSPORT"
position is allowed in order to achieve a cutting height
of 4.5".
to the "OPERATING"
OPERATING THE MOWER

OPERATING MOWER

To avoid serious injury or death:
A Do not operate the mower without the
discharge deflector being in place properly.
To avoid serious injury:
A Clear the work area of objects which might be
picked up and thrown.
A Do not direct the opening of the deflector at
bystanders especially children or animals.
Ejected objects may cause injury. Plan your
mowing carefully before starting operations.
A Keep bystanders and animals away from the
mowing area.
A Be sure to disengage the PTO clutch of the
mower before attempting to start the engine.
BPTO Switch
To engage the PTO, pull the PTO switch to the
"ENGAGED" (ON) position.

(1) PTO switch

1. If you get off the seat while the PTO is running, the
engine will stop automatically. (Operator presence
control)
2. Before starting the engine, push the PTO switch to the
"DISENGAGED" (OFF) position. If it is at the
"ENGAGED" (ON) position, the engine will not start.
A These interlock features are built-in.
23
"ENGAGED" (ON)
"DISENGAGED" (OFF)