Earpad Assy - Sony WH-1000XM4 Service Manual

WH-1000XM4
Note: Follow the disassembly procedure in the numerical order given.
2-2.

EARPAD ASSY

Note 1: The left and right earpads assy can be removed using
the same procedure.
This explanation uses illustrations from the left side.
Note 2: See page 26 for how to install the earpad assy.
– –
housing block
(L-ch)
rib
top side
rib
rib
lower side
– –
25
1 six claws
earpad assy
2 earpad assy
wearing
( detection
window
rib
rib
rib
– –
Refer to the figure below, hold the plate earpad (hard plastic part
internal of the earpad assy) by hand, pull it inside until sound
that claw of the earpad assy remove from the housing block is
heard, and remove the total of six claws in order.
holding position
holding
top side
position
three claws
lower side
Note 3: Do not hold and pull the cushion portion
of the earpad assy.
Doing so will damage the earpad assy.
Note 4: If you cannot remove the earpad assy by hand, insert the
TOOL FOR DISASSEMBLING (Part No.: 991340233)
into the gap between the earpad assy and housing block
at the claw positions, and remove the claws to remove
the earpad assy.
In this case, be careful as you may damage the housing
block.
Be careful not
to damage the
housing block.
Sony CONFIDENTIAL
For Authorized Servicer
plate earpad
NG
cushion portion
housing block
earpad assy
six claws
SYS SET