Sony WH-1000XM4 Service Manual page 15

WH-1000XM4
13. Start the NFC Tag Data Writing Application (MDR NFC Writer)
again.
14. Tap the [Write] button on the application screen.
15. Check the "Read-only" checkbox on the application screen, tap
the [Write] button, and check that "Read-only" is displayed.
WH-1000XM4
Put a
check
Tap
16. In the state of step 15 for the smartphone, touch the N-mark part
of the smartphone to the N-mark part of headset.
15
WH-1000XM4
Check
– Continued on upper right –
17. Check that "Success!" is displayed on the application screen,
and tap the [OK] button.
Note 7: When "Success!" is not displayed, refer to "3-3. Error Display" on
page 16.
Check
18. Tap the [Read] button on the application screen.
19. In the state of step 18 for the smartphone, touch the N-mark part
of the smartphone to the N-mark part of headset.
20. Check that "BD_ADDR" displayed on the smartphone screen
matches the Bluetooth address (BD_ADDR) checked in step 1
and the "MODE" column is "0000 (Read-only)".
21. End the NFC Tag Data Writing Application (MDR NFC Writer).
Sony CONFIDENTIAL
For Authorized Servicer
Check
– Continued on next page –
SYS SET