Operating The Sensor Buttons - Miele TXI 680 WP Operating Instructions Manual

Operating the tumble dryer
f Optical interface
This is used by Miele service techni-
cians as a transmission point.
g Sensor buttons for extra options
You can select extra options to aug-
ment the wash programs.
If a drying program has been se-
lected, the sensor buttons for the
possible extra options light up dimly.
h Sensor button 
You can use the  sensor button to
call up an energy consumption fore-
cast for the selected drying program.
i Sensor buttons 
The  sensor button starts the de-
lay start function. With the delay
start function, you can delay the
start of the program. The start of the
program can be delayed from
15 minutes up to a maximum of
24 hours. This allows you to make
use of night-time economy electric-
ity rates, for example.
Additional information can be found
in "4. Selecting program settings".
16
j Start/Add laundry sensor button
Touching the Start/Add laundry sen-
sor button starts a program. The
current program can be interrupted
to add laundry. The program can be
started when the sensor button is
flashing on and off. The sensor but-
ton lights up constantly once the
program has started.
k Program selector
For selecting programs and for
switching off. The tumble dryer is
switched on when you select a pro-
gram, and switched off by turning
the program selector to the  posi-
tion.

Operating the sensor buttons

The sensor buttons react to fingertip
contact. Selection is possible as long
as the respective sensor button is illu-
minated.
If a sensor button is brightly lit, this
means: currently selected
If a sensor button is dimly lit, this
means: selection possible