General Problems With The Tumble Dryer - Miele TXI 680 WP Operating Instructions Manual

Frequently Asked Questions

General problems with the tumble dryer

Problem
You can hear operating
noises (buzzing/hum-
ming).
A program does not
start.
The display is off and
the Start/Add laundry
sensor button is flash-
ing slowly.
The tumble dryer is
switched off at the end
of the program.
The display is in a dif-
ferent language.
The interior drum light-
ing does not come on.
62
Possible cause and solution
This is not a fault.
The compressor (heat pump) is operating.
 No action required. These noises are quite normal
and can be heard when the compressor is operat-
ing.
There is no obvious cause.
 Connect the power plug.
 Turn on the tumble dryer.
 Close the door.
 Check whether the fuse has tripped.
Power outage? When power is restored, any previ-
ously running program will restart automatically.
The display has switched off automatically to save
energy (Standby mode).
The drum will turn at intervals in the Anti-crease
phase.
 Press any button. This switches Standby off.
The tumble dryer switches off automatically. This is
not a fault, but a normal function.
A different language has been selected in "Settings,
Language ".
 Set the language you want. The flag symbol will
guide you.
Not a fault. The drum lighting switches off automati-
cally in the following cases:
If the door is closed.
If the door remains open for an extended period of
time.