Table of Contents
Advertisement
SITRANS FM100
9.3 Menu Mode
In menu mode, all device parameters can be set. The individual parameters are
arranged in menu groups by function. While the menu mode is activated, the
signal processing and the outputs are still active in the background. However, all
display parameters and outputs are updated after exiting the menu mode or in the
measuring mode.
Note: The menu mode will exit automatically after a certain time without using the
buttons, if the parameter "Menu Timeout" is set not equal to "0".
9.3.1
9.3.1.1
Parameters with predefined selection values are defined by means of list
selection. The currently selected menu item is displayed in orange text. The
selection can be moved with the
selection.
To activate the menu mode, press the button
parameters are divided into main groups and subgroups.
The buttons
menu groups can be shown on the display at the same time, the list of individual
menu items then scrolls up or down when the selection has reached the top or
bottom. To choose the selection, the key
the corresponding submenu or parameter setting level. For selecting of
predefined parameter values
the parameter and confirming with
higher menu level. To return to the main menu or to exit the menu mode, press
(repeatedly).
Step 6 (exit menu)
Step 1 Menu button
press for 3-5 seconds
page 18
Parameter setting
List Selection
are used to select the main groups. In the main menu not all
Step 5
Step 2
Parameter selection 1
Menu
keys, the key
is pressed and the device jumps to
and
are used. After changing the value of
the parameter is saved, and returns to the
Step 3
Parameter selection 2
The orientation can be
selected with up and
down buttons
is used to accept the
for 3-5 seconds. The
This transition happens automatically
Step 4
Apply selection
and save
A5E48762204-AA
Advertisement
Table of Contents
