Related Manuals for DeWalt DCF890
Summary of Contents for DeWalt DCF890
- Page 1 Instruction Manual DCF886 20V Max* 1/4" (6.35 mm) Brushless Cordless Impact Driver DCF890 20V Max* 3/8" (9.5 mm) Brushless Cordless Impact Wrench...
- Page 2 1/4" (6.35 mm) hex quick-release chuck (DCF886) serious injury. Battery release button WARNING: To reduce the risk of injury, read the Battery pack instruction manual. Worklight Belt hook (optional accessory) Mounting screw Anvil Hog ring (DCF890)
-
Page 3: General Power Tool Safety Warnings
English GENERAL POWER TOOL SAFETY WARNINGS b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust WARNING! Read all safety warnings and all mask, non-skid safety shoes, hard hat, or hearing instructions. Failure to follow the warnings and protection used for appropriate conditions will reduce instructions may result in electric shock, fire and/or personal injuries. -
Page 4: Additional Specific Safety Rules
English into account the working conditions and the • ANSI Z87.1 eye protection (CAN/CSA Z94.3), work to be performed. Use of the power tool for • ANSI S12.6 (S3.19) hearing protection, operations different from those intended could result • NIOSH/OSHA/MSHA respiratory protection. in a hazardous situation. -
Page 5: Batteries And Chargers
English battery liquid gets into the eye, rinse water over the open ...... Class II ..... wear respiratory eye for 15 minutes or until irritation ceases. If medical Construction protection attention is needed, the battery electrolyte is composed of (double insulated) ..... - Page 6 English appropriate Watt hour rating must be used to determine been paid by D WALT. In some areas, it is illegal to place the applicable shipping requirements. If utilizing the spent nickel cadmium, nickel metal hydride or lithium-ion shipping cap, the pack will be considered 3 batteries at batteries in the trash or municipal solid waste stream and the Watt hour rating indicated for “Shipping”.
-
Page 7: Charger Operation
English battery pack in the cavity. Unplug the charger before Minimum gauge for Cord sets attempting to clean. Total length of Cord in Feet Volts (meters) Charging a Battery (Fig. C) 120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7) 1. -
Page 8: Electronic Protection System
English refusing to light or by displaying a problem pack or charger (+4.5 °C), or above +104 °F (+40 °C). This is important blink pattern. and will prevent serious damage to the battery pack. nOTE: This could also mean a problem with a charger. 2. -
Page 9: Intended Use
English INTENDED USE FIG. D These impact wrench/drivers are designed for professional impact screwdriving applications. The impact function makes this tool particularly useful for driving fasteners in wood, metal and concrete. DO nOT use under wet conditions or in presence of flammable liquids or gases. -
Page 10: Maintenance
The center position of the control button locks the tool in the off position. When changing the position of the control DCF890 button, be sure the trigger is released. To install an accessory on the hog ring anvil, firmly push... - Page 11 English the tool. These chemicals may weaken the plastic In addition to the warranty, D WALT tools are covered by our: materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
- Page 12 WALT BATTERY AND CHARGER SYSTEMS Chargers/Charge Time (Minutes) 120 Volts 12 Volts Battery Output Cat # Voltage DCB606 60/20 DCB404 DCB406 DC9360 DCB361 DC9280 DW0242 DCB200 45/30** DCB201 DCB203 DCB203BT* DCB204 60/40** DCB204BT* DCB205 75/47** DCB207 DC9182 DCB120 DCB127 DCB080 *BT - Bluetooth®...