Battery Charging - XAG P100 Pro Pilot Operating Handbook

Battery Charging

ℹ
IMPORTANT
ℹ
ENSURE there are no obvious defects on the Battery or the Charger before use.
ℹ
ENSURE there are no liquid or foreign matter on the battery terminal, wipe and clean in a timely
fashion. Otherwise, it may cause poor contact, resulting in loss of power or charging failure.
ℹ
ENSURE Batteries & Chargers is placed on even ground with no nearby combustible materials.
ℹ
ENSURE Batteries have a minimum of 30cm distance between the batteries and Chargers
during Charging.
ℹ
ENSURE the Batteries are recharge every 90 days to maintain battery health.
ℹ
ENSURE pure water is used for heat Dissipation.
ℹ
ENSURE Water level should be kept between the Minimum and Maximum Water levels to
achieve the best heat dissipation effect.
ℹ
DO NOT clean the charging device with alcohol or other combustible liquids.
ℹ
DO NOT disconnect the AC cable or the Charging cable while the Charger is in use.
ℹ
DO NOT use this product under direct sunlight, in rain, or in a humid environment.
ℹ
DO NOT exceed the Max. Water level or Submerge the Battery in Water, or Battery will be
damage.
ℹ
DO NOT use Corrosive liquids for heat Dissipation, or Battery will be damage.
ℹ
DO NOT exceed 60 minutes for heat Dissipation, or Battery will be damage.
ℹ
DO NOT store Batteries with less than 30% Power or for an extended period, otherwise it may
damage the battery or impact battery life.
XAG AUSTRALIA
15A Socket
71