5. INSTALLATION AND WIRING
5
INSTALLATION AND WIRING
The detector is plugged in a base 2324. The zone line input and external LED are connected to the
base.
NOTE! Screen wire termination is not provided.
DATA
Wire size (Min)
Wire size (Max)
6
TEST MODE
For information about how to set a zone in test mode, see Planning Instructions or Operating
Instructions.
It is possible to use test equipment for testing, for example "SOLO" or "Testfire".
TECHNICAL DESCRIPTION 4318 • DOCUMENT NUMBER: MEW01961 • REVISION: 2
Mark
Zone line
External LED
2324
Ø 0,65 mm (0,3 mm²)
Ø 1,6 mm (2 mm²)
6
Mark
End-of-line device