The Procedure for mounting the interface board to each slot is as follows:
1) Check the exterior of the interface board for any damages.
2) Align each Interface board to the guardrails of the universal slot of the OfficeServ
7200 basic cabinet or expansion cabinet, and slide the Interface board into the slot.
3) Push the front panel lever of the interface board until the board is completely inserted
into the OfficeServ 7200 main board port.
© SAMSUNG Electronics Co., Ltd.
Figure 3.22 Mounting Interface Board to Slot
Figure 3.23 Inserting Control Board into the Main Board port
OfficeServ 7200 Installation Manual
3-27