Figure 2.10 Wall Installation (4); Figure 2.11 Wall Installation (5) - Samsung OfficeServ 7200 Installation Manual

4) Once the wall bracket is fixed to the wall, put a cross screw into the plastic anchor and
tighten the screw with the screwdriver.
5) There are two screws inside of two holes among four holes at the bottom of OfficeServ
7200 cabinet as shown below. To install on the wall, loosen the two screws for about 2
mm as shown in the figure.
© SAMSUNG Electronics Co., Ltd.

Figure 2.10 Wall Installation (4)

2 mm

Figure 2.11 Wall Installation (5)

OfficeServ 7200 Installation Manual
2-7