Requirements; Required Aids And Tools; General Information; Safety Information - Siemens UROSKOP ACCESS Installation And Startup

4
2-

Requirements

1General Information

Required aids and tools

NOTE
General Information
•
The original version of this document was written in German.
•
The illustrations and drawings may differ slightly from the delivery condition, depending
on the actual system.
•
Damaged or worn parts must be replaced with original parts.

Safety information

General safety information
WARNING
General Safety Information, Electrical
V
WARNING
UROSKOP ACCESS
All tools, measuring equipment and aids, with the exception of the
standard installation tool kit, are listed and specified in the Service
Tools Catalogue (contained in the Spare Part Catalogue).
Danger of injuries, death or material damage.
Non-compliance can lead to death, injury or material damage.
Observe the product-specific safety guidelines in this
document, the general safety guidelines in document
TD00-000.860.01, and the safety guidelines in accor-
dance with ARTD Part 2.
Electrical safety!
Non-compliance can lead to severe injury or even death, as well as
material damage.
After the cover panels are opened, parts under voltage
are accessible. To avoid danger, disconnect the system
from the power supply prior to opening the covers. Pull
out the power supply plug.
If an uninterruptible power supply (USV) is installed in
the system, the voltage output of the USV must also be
deenergized or the voltage output plug must be discon-
nected.
SPL5-330.814.01.05.02
08.05
General Information
Page 4 of 18
CS PS 24
0
0
0
0
Siemens AG
Medical Solutions