I Cannot Perform The Ir Hotsync ® Operation - Sony CLIE PEG-TJ25 Troubleshooting Manual

I cannot perform the IR HotSync
B Check that the IR port of your computer is enabled.
®
B The IR HotSync
an IR port.
B Check that
(HotSync) is displayed in the task tray (Notification area) at
the bottom right of your computer window and HotSync Manager is
running. When HotSync Manager is running, the shortcut menu should
be displayed by clicking
B If you are using Windows 2000 Professional/Windows XP, click
(HotSync) in the task tray (Notification area) at the bottom right of your
computer window and ensure [InfraRed] is selected.
B If you are using Windows 98 Second Edition/Windows Me, click
(HotSync) in the task tray (Notification area) at the bottom right of your
computer window and ensure [Local Serial] is selected.
B If you are using Windows 98 Second Edition/Windows Me, click
(HotSync) in the task tray (Notification area) at the bottom right of your
computer window and click [Local] in the Setup window. Then ensure
[Serial Port] of the simulated port for IR communication is selected.
B Ensure [Local] and [IR to a PC/handheld] are selected in the HotSync
screen on your CLIÉ handheld.
B Point the IR port of your CLIÉ handheld directly at the IR port of your
computer. The distance between the IR ports of your CLIÉ handheld and
computer should be 4 to 8 inches (approximately 10 to 20 centimeters). The
optimum distance for beaming may vary depending on devices.
B You cannot perform the IR HotSync
power is inadequate. After charging the battery of your CLIÉ handheld, try
®
the IR HotSync
B Reduce the transmission speed.
Tap [IR to a PC/Handheld] in [Connection] of the Preferences screen.
Then tap [Edit...], [Details...] and specify [Speed:] in the Details screen.
operation is not available if your computer does not have
(HotSync).
®
operation again.
®
operation
operation if the remaining battery
25