My Clié Handheld Does Not Respond; My Clié Handheld Keeps Turning Itself Off - Sony CLIE PEG-TJ25 Troubleshooting Manual

My CLIÉ handheld does not respond
B Is the POWER/HOLD switch of your CLIÉ handheld in HOLD mode?
Your CLIÉ handheld does not operate when the POWER/HOLD switch is
in HOLD mode. Make sure you release HOLD mode.
B Is your CLIÉ handheld placed near the IR port of your computer?
Move your CLIÉ handheld away from the IR port of your computer except
when performing the IR HotSync
You can also disable the IR feature by selecting [Off] next to [Beam
Receive:] in [General] of the Preferences screen.
B Perform a soft reset by pressing the RESET button at the back of your CLIÉ
handheld.
b
For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ™ handheld" in the supplied "Read This First (Operating Instructions)".
My CLIÉ handheld keeps turning itself off
B Your CLIÉ handheld is designed to turn itself off after a period of inactivity
(Automatic power-off). You can set the automatic power-off time by
selecting time for [Auto-off After:] in [General] of the Preferences
screen.
b
For details, refer to "Customizing your CLIÉ™ handheld (Preferences): Setting
the automatic
B Did you set [After a preset delay] from [Auto Lock Handheld:] in the
Security screen?
If you set [After a preset delay] from [Auto Lock Handheld:], your CLIÉ
handheld may turn off after a shorter period even if you set the automatic
power-off time.
b
For details, refer to "Protecting your data with a password: Locking your CLIÉ
handheld with a password (Data protection)" in "Handbook" (PDF format).
10
power
-off time" in "Handbook" (PDF format).
®
operation, as a malfunction may occur.