I Cannot Start The Hotsync ® Operation By Tapping; (Hotsync) On The Hotsync Screen - Sony CLIE PEG-TJ25 Troubleshooting Manual

I cannot perform the local HotSync
B Is the USB port active?
Check whether the USB port works normally by connecting another USB
device, such as a USB mouse.
B If you use an extended terminal device for laptop computers, such as a port
replicator, you may not be able to use either the port replicator or the USB
port of your computer.
B Quit all applications other than Palm™ Desktop for CLIÉ.
If you cannot perform the HotSync
instructions, perform a soft reset by pressing the RESET button at the back of
your CLIÉ handheld.
b
For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ™ handheld" in the supplied "Read This First (Operating Instructions)".
For particular problems regarding the HotSync
refer to the following.
I cannot start the HotSync

(HotSync) on the HotSync screen

B Ensure [Local] and [Cradle/Cable] are selected in the HotSync screen.
B Perform a soft reset by pressing the RESET button at the back of your CLIÉ
handheld.
b
For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting your
CLIÉ™ handheld" in the supplied "Read This First (Operating Instructions)".
®
operation (continued)
®
operation even after following the above
®
operation by tapping
®
operations,
Continued on next page
• • • • • • • • • • • • • • • • • • • •
19