RockShox TwistLoc Ultimate Service Manual page 11

14 Apply grease over the top of the bearing balls. Install a new o-ring into
the o-ring gland.
15 Install the clamp bolt.
Clamp bolt torque off bar
Clamp bolt torque on bar
16 Install new cable liner(s).
17 Install a short cable into the upper hole. Install a long cable into the
lower hole. Install the plug.
0.6 N∙m (1 in-lb)
1.1 N∙m (10 in-lb)
Grease
Remote Throttle and Housing Service
2.5 mm See Table
11