Setpoints From Nc - Siemens SINAMICS V60 Getting Started

Note
Detailed description of individual display data can be found in Section 3.3 "Display data list" (Page 31).
3.1.3

Setpoints from NC

Machine Data Designation
31020 ENC_RESOL
31400 STEP_RESO
L
26
Unit Axis
PPR X, Z (808D Turning)
X, Y, Z (808D Milling)
IPR X, Z (808D Turning)
X, Y, Z (808D Milling)
Setpoint Description
10,000 Encoder revolution (2,500) x
Multiplier (4)
10,000 Steps per servo motor revolution
Controlled Power Module (CPM60.1)
A5E03975175-002, 04/2014