1.4
Technical data
Technical data for CPM60.1 Drive Modules
Order No. : 6SL3210-
General performance
Rated output current
Max. output current
Rated output power
Rated input power
Rated motor torque
Application field
Configurable controller
Axis
Display
Keys on panel
Setpoint interface
Overload capability
Applicable load inerita
Control performance
Control mode
Input pulse frequency
Drive input
Drive output
Protection functions
Encoder
Mains supply voltage
Environmental conditions
Ambient temperature
10
5CC14-0UA0
5CC16-0UA0
4 A
6 A
8 A
12 A
0.8 kW
1.2 kW
0.9 kW
1.4 kW
4 Nm
6 Nm
Turning machines, milling machines, engraving, packaging, printing etc.
SINUMERIK 808D, SIMATIC S7-200 and SIMATIC S7-1200
Single-axis drive
6-digit, 7-segment LED display, two LED status indicators
4 tact switch keys
Pulse interface
≤ 5 times of motor inertia
1. Position control (Input mode: pulse + direction signals)
2. JOG mode
≤ 333 kHz
1. Servo enable 2. Alarm cancel
1. Brake output 2. Servo alarm 3. Servo ready 4. Zero mark
Overcurrent, overvoltage, undervoltage, overload, IGBT overtemperature,
overspeed, encoder abnormal protections, I
TTL encoder 2500p/r with U, V, W rotor position signal; one zero mark
Rated voltage: 3 AC 220 V to 240 V
Tolerance: - 15 % ~ + 10 %
50/60 Hz, unregulated DC-Link
Operation
0 to 45 °C: without power derating (100% load);
45 to 55 °C: with power derating (by 0% at 45 °C up to
30% at 55 °C).
5CC17-0UA0
5CC21-0UA0
7 A
10 A
14 A
20 A
1.6 kW
2.0 kW
1.9 kW
2.3 kW
7.7 Nm
10 Nm
t detection
2
Controlled Power Module (CPM60.1)
A5E03975175-002, 04/2014