Properties; Digital Electronic Module 2Ro No/Nc Dc24 - Siemens SIMATIC ET 200S Manual

Properties

2.1 Digital Electronic Module
2RO NO/NC DC24..48V/5A AC24..230V/5A
(6ES7132-4HB13-0AB0)
Properties
● Digital electronic module with two relay outputs
● Output current 5 A per output
● Substitute value
● Suitable for solenoid valves, DC contactors, and indicator lights
● Isolated from the supply voltage
● Normally opened and normally closed contacts
Note
If you connect an extra-low voltage system (SELV/PELF) on one channel of the relay
subassembly, you can only use an extra-low voltage system (SELV/PELF) on the other
channel.
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Pin assignment for 2RO NO/NC DC24..48V/5A AC24..230V/5A (6ES7132-4HB13-0AB0)
Terminal Assignment
1 Common
0
2 Normally open
contact
0
3 Normally
closed contact
4 n.c.
A4 AUX1
A3 AUX1
6
Terminal Assignment
5 Common
6 Normally
open contact
7 Normally
closed con-
0
tact
1
8 n.c.
A8 AUX1
A7 AUX1
Digital Electronic Module 2RO NO/NC DC24..48V/5A AC24..230V/5A (6ES7132-4HB13-0AB0)
Common , NOC
•
1
n
n.c.: Not connected (max. 30 VDC can be connected)
•
1
AUX1: Protective-conductor terminal or potential bus (freely
•
usable up to 230 VAC)
Notes
or NCC , channel n
n n
Manual, 08/2019, A5E48281338-AA
2