Miele KWT 2662 ViS Operating And Installation Instructions page 30

Installation
The anti-tip brackets prevent the wine
conditioning unit from tipping.
The anti-tip brackets are also used to fix
the installation niche securely to the
surrounding walls.
 Use 2 anti-tip brackets  for each in-
dividual appliance or 4 anti-tip brack-
ets for each (side-by-side) combina-
tion of 2 appliances.
 Position the anti-tip brackets  on
the left and right of the niche.
Depending on the subsequent adjust-
ment of the feet, the anti-tip brackets
are positioned 84"-85 3/16" (2,134–
2,164 mm) from the floor of the niche.
30

Danger of injury and damage to
the appliance due to the wine condi-
tioning unit tipping over.
If the anti-tip brackets are fixed too
high up, they cannot be used to se-
cure the wine conditioning unit.
The distance between the anti-tip
brackets and the wine conditioning
unit must not exceed 5/16" (8 mm).
 Make sure that the gap between the
wine conditioning unit's rear wall and
the installation niche does not exceed
2" (51 mm).
 Place a wooden wedge behind the
anti-tip brackets  if necessary.
 While holding the anti-tip brackets in
place, mark the necessary drill holes
on the rear wall of the installation
niche.