Cleaning The Clean Station; Replacing The Dust Bag; Cleaning The Fine Dust Filter - Samsung Jet Bot VR50T95735W/SA User Manual

Cleaning the Clean Station

Before cleaning the Clean Station, unplug the power cord from the electrical outlet.

Replacing the Dust Bag

Cleaning the Fine dust Filter

1 Press the [PUSH]
button on the top
of the Clean Station
to open its cover.
3 Remove the old
Dust Bag and put
a new Dust Bag
into the Dust Bag
holder by fitting
into the grooves on
the holder.
– Push the Dust
Bag to the end.
1 Grasp the grooves
at the rear of the
Clean Station and
detach the Fine
dust Filter cover.
3 Clean the Fine dust
Filter.
– Do not clean the
Fine dust Filter
with water.
2 Pull the top of the
Dust Bag holder
gently.
– If you do not
pull the Dust
Bag holder, you
cannot replace
the Dust Bag
due to the safety
device.
4 Push the top of the
Dust Bag holder
gently until you
hear it click.
5 Close the Clean
Station's cover.
2 Detach the Fine
dust Filter.
4 Attach the Fine
dust Filter and the
Fine dust Filter
cover.
English 27