Programme Settings; Air Cooling - Miele PG 8582 CD Operating Instructions Manual

Programme settings

You can use this menu to customise the current programme to suit
technical requirements and the load or to reset all programmes to the
factory default settings.
Additional specialist knowledge is required to alter programme
settings and this should therefore be undertaken only by experienced
users or by the Miele Customer Service Department.
More information can be found in "Programme settings".

Air cooling

During the drying phase, the hot exhaust air from the wash cabinet is
released into the room via the steam condenser. Depending on the
size of the room, this can heat up the room to a greater or lesser
degree.
To reduce this effect, the heated air can be cooled down during the
drying phase using a fine spray in the steam condenser.
Cooling in the steam condenser will increase water consumption.
Open the menu as follows:

 button
Further settings

Air cooling

Air cooling
Yes
No
Yes
-
Hot air is cooled using the steam condenser.
No
-
Hot air is released uncooled into the room.
Select an option using the  and  arrow buttons.

Press OK to save the setting.

Further settings
87