Electromagnetic Compatibility (Emc) - Miele PG 8582 CD Operating Instructions Manual

Venting the
circulation pump
Screw the machine to the continuous worktop through the holes in

the front trim on the left and right.
Please contact the Miele Customer Service Department to secure it
at the sides to adjacent cabinetry.
 The gaps between a built-in machine and adjacent cabinetry
must not be sealed, e.g. with silicone sealant, as this could
compromise ventilation of the circulation pump.

Electromagnetic compatibility (EMC)

The machine has been tested for electromagnetic compatibility (EMC)
in accordance with EN 61326-1 and is suitable for operation in
commercial environments, such as hospitals, medical practices and
laboratories and other similar environments which are connected to
the mains power supply.
The machine's high frequency (HF) energy emissions are very low and
are therefore unlikely to interfere with other electronic machines in the
vicinity.
Flooring in the installation area must be wood, concrete or tiled.
Synthetic flooring must be able withstand a relative humidity level of
30 % to minimise the risk of electrostatic discharges.
The quality of the power supply should comply with that found in a
typical commercial or hospital environment. Check that the power
supply voltage is within a range of +/-10 % (UK: -6/+10 %) of its
nominal value.
Installation
147