Context Menu; Touch Operation - Siemens SINUMERIK 840D sl Operating Manual

Introduction
1.4 Operator interface
1.4.9

Context menu

When you right-click, the context menu opens and provides the following functions:
● Cut
Cut Ctrl+X
● Copy
Copy Ctrl+C
● Paste
Paste Ctrl+V
Program editor
Additional functions are available in the editor
● Undo the last change
Undo Ctrl+Z
● Redo the changes that were undone
Redo Ctrl+Y
Up to 10 changes can be undone.
1.4.10

Touch operation

If you have an operator panel with a touch screen, you can perform the following functions
with touch operation:
Operating area switchover
Channel switchover
42
You can display the operating area menu by touching the display symbol for
the active operating area in the status display.
You can switch over to the next channel by touching the channel display
in the status display.
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Universal