NEC Express5800 Series Installation Manual page 37

Chapter 1 Installing Windows
11. Select Custom: Install Windows only (advanced).
12. The "Select Windows installation location" screen is displayed.
If the driver was loaded in steps 6 and 7, or if the onboard RAID controller is not in use, proceed to step
15.
If you select Load driver here, the following screen will be displayed.
Loading the driver
To install the device driver of the drive, insert the installation media that contains the driver
file and click OK.
Note: The installation media is a CD, DVD, or USB flash drive.
13. After setting the Starter Pack DVD in the UBS-DVD drive, assign a file directory, and click OK.
onboard RAID Controller
—
<Starter Pack DVD>:\software\005\drivers\sw_raid1_driver
— RAID Controller (N8103-192/193)
<Starter Pack DVD>:\software\005\drivers\dac1_driver
14. Select the following driver from the displayed list of drivers, and click Next.
— onboard RAID Controller
RAID Controller (N8103-192)
—
RAID Controller (N8103-193)
—
Browse (B) OK
：HPE Smart Array S100i SR Gen10 SW RAID
：HPE Smart Array E208i-a SR Gen10
：HPE Smart Array P408i-a SR Gen10
Express5800/R110j-1 Installation Guide (Windows)
Installing Windows Server 2016
Cancel
37