NEC Express5800 Series Installation Manual page 35

Chapter 1 Installing Windows
5. Click Install now.
If the following message is displayed: Go to Step 6.
If the following message is not displayed: Go to Step 8.
Loading the driver
The necessary media driver for the PC in use could not be found. Types of media
drivers include DVD, USB, and hard disk drivers. If you have a DC, DVD, or USB flash
drive with the driver stored, please insert it.
Note: If the Windows installation media is stored in the DVD drive or the USB drive, it can
be removed for this step.
6. After connecting the removable media where the onboard RAID controller driver was copied, specify the
path and click OK.
<Removable media>:\sw_raid1_driver
7. Select the following driver from the displayed list of drivers, and click Next.
HPE Smart Array S100i SR Gen10 SW RAID
8. Type the product key, and then click Next.
Browse (B)
Tips
If you are using Backup DVD-ROM, this screen does not appear.
Express5800/R110j-1 Installation Guide (Windows)
OK Cancel
Installing Windows Server 2016
35