Operating The Ignition Switch - Toro 74960 Operator's Manual

Figure 16
1. On position
g008959
2. Off position
Operating the Ignition
Switch
1. Turn the ignition key to the S
(Figure 17).
Note:
When the engines starts, release the key.
Important:
Do not engage starter for more
than 5 seconds at a time. If the engine fails
to start allow a 15 second cool-down period
between attempts. Failure to follow these
instructions can burn out the starter motor.
Note:
You may need to make more than 1
attempt to start the engine the first time after
adding fuel to a completely empty fuel system.
2. Turn the ignition key to shut off the engine.
22
position
TART
Figure 17
g008947