Table of Contents
Advertisement
Important:
Do not tighten the cable to the
point the seed gate is tight to the right with
extreme tension on the cable as this will
damage the gate and the cable. Only adjust
it until the openings in the bottom of the
seeder are closed.
6.
Tighten the jam nuts and test the seeder-control
lever to ensure that the seed gate opens and
closes correctly.
Cleaning
Washing the Machine
Wash the machine as needed using water alone
or with a mild detergent. You may use a rag when
washing the machine
Important:
Do not use brackish or reclaimed
water to clean the machine.
Important:
Do not use power-washing equipment
to wash the machine. Power-washing equipment
may loosen important decals or wash away
necessary grease at friction points. Avoid
excessive use of water near the control panel and
engine.
Important:
Do not wash the machine with the
engine running. Washing the machine with the
engine running may result in internal engine
damage.
Cleaning the Engine Area
Service Interval: Before each use or daily (Clean the
engine and exhaust area more often
in dry or dirty conditions.)
CAUTION
Excessive debris around engine and exhaust
area can cause engine and exhaust area to
overheat, which can create a fire hazard.
Clean all debris from engine and exhaust area.
1.
Shut off the engine, wait for all moving parts to
stop, and remove the spark-plug wire.
2.
Clean all debris from the engine air-intake
screen and around the engine.
3.
Wipe up any excessive grease or oil around the
engine.
Cleaning the Bottom of the
Machine
Service Interval: Before each use or daily
1.
Shut off the engine, wait for all moving parts to
stop, and remove the spark-plug wire.
2.
To ensure the best performance, keep the
underside of the machine clean.
31
Advertisement
Table of Contents
