Sharp Actius PC-MV10 Operation Manual page 114

Make sure to turn off your computer and remove the AC adapter.
Otherwise the computer may be damaged.
2. Close the display cover and turn over the computer on a flat place.
3. Slide the optical drive stopper backward and pull out the optical drive unit
from the computer.
Keep the optical drive wrapped and in a safe place to avoid any
damage.
4. Install the weight saver into the bay until it clicks.
Replacing the Optical Drive Unit
1. Turn off the computer and disconnect the AC adapter from the computer.
Make sure to turn off your computer and remove the AC adapter.
Otherwise the computer may be damaged.
2. Close the display cover and turn over the computer on a flat place.
3. Slide the optical drive stopper backward and pull out the weight saver from
the computer.
A-5