Table of Contents
Advertisement
Security Functions (Optional)
Input Password
IMPORTANT:
When required to activate the numeric keypad
function, consult your authorized dealer.
If the password is forgotten, the machine must be
modified. Be extremely careful not to forget the
password.
1. Turn the key switch ON. After the starting screen is
displayed, the password input screen will be displayed.
2. Input a password by using the numeric keypad.
3. The monitor unit matches the input password to the
registered one. If they match, the basic screen displays.
The engine is ready to run. If an incorrect password is
input 3 times, a buzzer sounds for 30 seconds. During
that time, the buzzer does not stop even if the key switch
is turned ON/OFF.
f
NOTE: If you make a mistake while entering the password,
push the CLEAR key in order to erase the entered characters.
4. After 30 seconds, if the key switch is turned to the ON
position, the starting screen displays and the password
input screen displays again. Then the password can be
input again.
5. If an incorrect password is input again, the buzzer
sounds for a further 30 seconds.
OPERATOR'S STATION
1-16
Starting Screen
Password Input Screen
Basic Screen
MDAA-01-003EN
MDAA-01-085EN
MDAA-01-086EN
MDC1-01-001
Advertisement
Table of Contents
Troubleshooting
