Seat Belt - Hitachi ZAXIS 120-6 class Operator's Manual

Seat Belt

d
WARNING:
 Be sure to use seat belt (1) when operating the
machine.
 Before operating the machine, be sure to examine
seat belt (1) and attaching hardware for any failure. If
any damage and/or wear are found, replace the part
concerned.
 Replace seat belt (1) every 3 years regardless of
appearance.
 Consult your authorized dealer for replacement.
Seat Belt
1. Confirm that seat belt (1) is not twisted. Securely insert
the end of seat belt (1) into buckle (2). Lightly pull on the
belt to confirm that the buckle latches securely.
2. Push button (3) on buckle (2) to unfasten seat belt (1).
Replace seat belt (1) if it is damaged or worn, or if the
machine is involved in an accident which puts severe stress
on the seatbelt.
If the engine is operated without fastening seat belt (1) and
the pilot control shut-off lever is lowered, the buzzer sounds
after 5 seconds.
After 30 seconds the buzzer changes from a long to a short
intermittent buzzing.
Fastening the seat belt makes the buzzer stop.
OPERATOR'S STATION
1-151
2 1
2 1
3
M1U1-01-031
M1U1-01-032