Connecting Hdmi Equipment; Displaying An Image From Hdmi Equipment - Sharp AQUOS LC-57D90U Operation Manual

Using external equipment

Connecting HDMI equipment

Please use the INPUT 4 terminal when connecting HDMI equipment.

Displaying an image from HDMI equipment

To watch an HDMI equipment image, select
1
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV. (See page 46.)
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "HDMI Setup", and then
4
press ENTER.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
3D Noise Reduction
Mosquito Noise Reduction [Low]
HDMI Setup
36
HDMI equipment
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5 INPUT5
i.LINK
[Low]
HDMI cable
(commercially available)
Press a/b to select the desired item and
5
press ENTER.
Press a/b/c/d to select the desired setting
6
and press ENTER.
HDMI Setup
Selectable items
items
Signal Auto/RGB/YCbCr
Type 4:4:4/YCbCr 4:2:2
Color Auto/ITU601/
Matrix ITU709
Dynamic Standard/
Range Out of Standard
Auto View Enable/Disable
Press MENU to exit.
7
NOTE
• Refer to your external equipment operation manual for
the signal type.
Description
Select the signal type from
an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Select the internal color
space conversion method
when an RGB signal is
input. Normally, select
Auto.
Select the signal amplitude
range. Normally, select
Standard.
Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.