Page 1
July 2011 LC-xxLE831E Training Notes Issued by: CE After Sales Service...
Page 2
July 2011 Training Notes MODEL LC-40/46/52/60LE831E Note – Please use the ZOOM feature to view the presentation. Speech bubbles are training notes. Click to access the notes Issued by: CE After Sales Service...
July 2011 Contents 1. Model introduction 2. Block Diagram 3. Schematic Diagrams 4. New Technologies 5. Software Updating 6. Service Mode 7. IP Control 8. USB Clone 9. Adjusting Process Issued by: CE After Sales Service...
July 2011 Model Introduction Based on LE925 with MEDIATEK Video Processor (MT5395). RGBY Panel. Sizes: 40”, 46”, 52” and 60”. Type of cabinet: - Front cabinet: Light metallic - Slim Full-Flat and seamless design - Stand: Plastic - Bottom speakers - Subwoofer - Touch-sensor keys Models:...
Page 5
July 2011 Model Introduction Important Specification Notes: • Models use 2 generation Quattron panels • Only HDMI 1 supports the ARC feature • You can only use USB 1 for the SKYPE camera. When connected to other USB ports, the unit will crash and reset •...
Page 6
July 2011 Model Introduction • X-GEN TFT LCD 100Hz (double frame driving) (UV2 A). • RS-232C terminal. • New ASV mode Low reflective Black TFT panel. • IP control (B2B, enable <PC or Ctrol panel to control • Quattron: 4 colour technology. basic TV functions) •...
Page 7
July 2011 Model Introduction Issued by: CE After Sales Service...
Page 8
July 2011 Model Introduction Issued by: CE After Sales Service...
Page 9
July 2011 Model Introduction Issued by: CE After Sales Service...
Page 10
July 2011 Model Introduction CPU Comparison MT5391 MT5395 Issued by: CE After Sales Service...
Page 11
July 2011 Model Introduction CPU Comparison MT5395 MT5391 Issued by: CE After Sales Service...
Page 12
July 2011 Model Introduction CPU Comparison MT5395 MT5391 Issued by: CE After Sales Service...
Page 13
July 2011 Model Introduction CPU Comparison MT5395 MT5391 Issued by: CE After Sales Service...
Page 14
July 2011 Model Introduction CPU Comparison MT5395 MT5391 Issued by: CE After Sales Service...
Page 15
July 2011 Model Introduction CPU Comparison MT5395 MT5391 Issued by: CE After Sales Service...
Page 16
July 2011 Model Introduction CPU Comparison MT5395 MT5391 Issued by: CE After Sales Service...
Page 17
July 2011 Model Introduction CPU Comparison MT5395 MT5391 Issued by: CE After Sales Service...
Page 18
July 2011 Model Introduction CPU Comparison Issued by: CE After Sales Service...
Page 19
July 2011 Model Introduction CPU Comparison MT5395 MT5391 Issued by: CE After Sales Service...
Page 20
July 2011 Model Introduction Parts Codes MODEL NAME JPN MOD. MAIN LCD CONTROL POWER ICON LC40LE831E A3IK4831EP DUNTKF733FM52 DUNTKF906FM54 RUNTKA787WJQZ DUNTKF770FM51 LC46LE831E A3IK5831KP DUNTKF733FM52 RUNTKA4909TPZM RUNTKA791WJQZ DUNTKF770FM51 LC52LE831E A3IK6831KP DUNTKF733FM52 RUNTKA4909TPZH RUNTKA795WJQZ DUNTKF770FM51 LC60LE831E A3IK7831KP DUNTKF733FM52 RUNTK4909TPYN RUNTKA799WJQZ DUNTKF770FM51 MODEL NAME TOUCH-KEY R/C CONTROL IR TRANSMITER...
July 2011 Schematic Diagrams 40” & 46” Main Unit - Tuner Issued by: CE After Sales Service...
Page 27
July 2011 Schematic Diagrams 40” & 46” Main Unit - Terminal Issued by: CE After Sales Service...
Page 28
July 2011 Schematic Diagrams 40” & 46” Main Unit - HDMI Issued by: CE After Sales Service...
Page 29
July 2011 Schematic Diagrams 40” & 46” Main Unit - CPU Issued by: CE After Sales Service...
Page 30
July 2011 Schematic Diagrams 40” & 46” Main Unit - DDR Issued by: CE After Sales Service...
Page 31
July 2011 Schematic Diagrams 40” & 46” Main Unit - Flash Issued by: CE After Sales Service...
Page 32
July 2011 Schematic Diagrams 40” & 46” Main Unit - UCOM Issued by: CE After Sales Service...
Page 33
July 2011 Schematic Diagrams 40” & 46” Main Unit - Panel Issued by: CE After Sales Service...
Page 34
July 2011 Schematic Diagrams 40” & 46” Main Unit – Audio AMP Issued by: CE After Sales Service...
Page 35
July 2011 Schematic Diagrams 40” & 46” Main Unit – Power Issued by: CE After Sales Service...
Page 36
July 2011 Schematic Diagrams 40” & 46” Main Unit – DEMOD_CI Issued by: CE After Sales Service...
Page 37
July 2011 Schematic Diagrams 40” & 46” Main Unit – LAN_USB Issued by: CE After Sales Service...
Page 38
July 2011 Schematic Diagrams SiL9387 Por Processor InstaPort technology with five HDMI inputs and single port output. • The SiI9387 is the second generation HDMI port processor with HDMI Ethernet and Audio-return channel (HEAC) support on one input port. • Five HDMI input ports and single output port. •...
Page 39
July 2011 Schematic Diagrams 40” Power Supply 1/3 Issued by: CE After Sales Service...
Page 40
July 2011 Schematic Diagrams 40” Power Supply 2/3 Issued by: CE After Sales Service...
Page 41
July 2011 Schematic Diagrams 40” Power Supply 3/3 Issued by: CE After Sales Service...
Page 42
July 2011 Schematic Diagrams 46” Power Supply 1/3 Issued by: CE After Sales Service...
Page 43
July 2011 Schematic Diagrams 46” Power Supply 2/3 Issued by: CE After Sales Service...
Page 44
July 2011 Schematic Diagrams 46” Power Supply 3/3 Issued by: CE After Sales Service...
Page 45
July 2011 Schematic Diagrams 52” Power Supply 1/4 Issued by: CE After Sales Service...
Page 46
July 2011 Schematic Diagrams 52” Power Supply 2/4 Issued by: CE After Sales Service...
Page 47
July 2011 Schematic Diagrams 52” Power Supply 3/4 Issued by: CE After Sales Service...
Page 48
July 2011 Schematic Diagrams 52” Power Supply 4/4 Issued by: CE After Sales Service...
Page 49
July 2011 Schematic Diagrams 60” Power Supply 1/4 Issued by: CE After Sales Service...
Page 50
July 2011 Schematic Diagrams 60” Power Supply 2/4 Issued by: CE After Sales Service...
Page 51
July 2011 Schematic Diagrams 60” Power Supply 3/4 Issued by: CE After Sales Service...
Page 52
July 2011 Schematic Diagrams 60” Power Supply 4/4 Issued by: CE After Sales Service...
July 2011 New Technologies New 3d glasses: Rechargeable via USB Issued by: CE After Sales Service...
Page 54
July 2011 New Technologies 3D-2D Mode Conversion Switch Issued by: CE After Sales Service...
Page 55
July 2011 New Technologies 3D-2D Mode Conversion Switch (cont..) Technical Description When viewing 3D contents in normal mode; the 3D glasses open its left shutter only while the left image is displayed and conversely open its right shutter only while the right image is displayed. However, when viewing 3D contents in 3D/ 2D conversion mode;...
Page 56
July 2011 New Technologies Auto Power OFF Function Issued by: CE After Sales Service...
Page 57
Skype. • For detailed Skype information, please visit the following website: ✶ Available from http://freetalk.me/product/sharp/ http://www.skype.com/ NOTE • Calling phones and mobiles, sending SMS (short message service) mail • The Skype FREETALK® communication camera is not supplied by and saving instant messages are not available.
Page 58
July 2011 New Technologies Skype™ (cont...) GETTING STARTED To start Skype, perform the following procedure: Connect the communication camera Connect the communication camera directly to USB 1 port on your TV. NOTE • Depending on your TV, the USB port to be connected may differ. For more details, see your TV operation manual.
Page 59
July 2011 New Technologies Skype™ (cont...) 3-1. Create a new Skype account If you already have a Skype account, you can use that account and go to the next step (3-2. Sign in to Skype). If you do not have a Skype account: 1 Select “Don't have a Skype Name?”...
Page 60
July 2011 New Technologies Skype™ (cont...) 3-2. Sign in to Skype To sign in with an existing account: 1 Enter your registered Skype Name and Password. 2 Select “Sign in” and press OK or ENTER. NOTE • If you have signed in on your TV before, select the Skype Name box and press OK or ENTER.
Page 61
July 2011 New Technologies Skype™ (cont...) 3 Enter the Skype name, E-mail address, or full name of the person you want to add. 4 Select “Search” and press OK or ENTER. 5 Select the person you want to add from the search result and press OK or ENTER.
Page 62
July 2011 New Technologies Skype™ (cont...) Issued by: CE After Sales Service...
July 2011 Software Updating Software Updating Procedure • 1. Turn on the AC power. • 2. Insert the upgrading USB fl ash memory for upgrade into the service slot. (After a while, an external input changes into USB automatically.) • 3.
Page 64
July 2011 Software Updating Software Updating Procedure (cont...) 5. After a while, if software update file is detected in the USB memory device, the following screen shows up. Select OK when if there is no problem. • If USB memory device isn’t correctly inserted in TV, caution shows up. Please insert USB memory device and retry software update.
Page 65
July 2011 Software Updating Software Updating Procedure (cont...) 6. The caution for update shows up. The picture will temporary go dark until the software update display appears. Wait several minutes and don’t unplug the AC cord. Select OK when if there is no problem. 7.
Page 66
July 2011 Software Updating Software Updating Procedure (cont...) 8. When all the procedures are complete, the following upgrade success screen shows up. The new software version can be confirmed on screen. After a while, Turn off power and boot-up automatically. TV is restarted automatically, the AC cord need not be pulled out.
July 2011 Service Mode Entering and exiting the adjustment process mode 1. Turn off the power by pushing the “Power” key of “Touch sensor” when TV is working. Hold down “Power” key until central “ICON” FLASHES once (5-6 sec). 2. While holding down the “VOL (-)” and “INPUT” keys on the set at once, push the “Power” key of touch sensor. Release “Power”...
Page 68
July 2011 Service Mode Display Description (Adjustment checking) Issued by: CE After Sales Service...
Page 69
July 2011 Service Mode Service Mode Menu Issued by: CE After Sales Service...
Page 70
July 2011 Service Mode Service Mode Menu (cont...) Issued by: CE After Sales Service...
Page 71
July 2011 Service Mode Public Mode Starting the Public Mode • There are three following ways to display the PUBLIC Mode setting screen. 1) On the process adjustment mode screen (2/24), set the “HOTEL MODE” Flag to ON. a) Turn off the power, hold down power key until central “ICON” fl ashes once. b) Hold down “Vol ▲”...
Page 72
July 2011 Service Mode 5. Lamp Error Detection 1. Function This LCD colour TV set incorporates a Lamp error detection feature that automatically turns off the power for safety under abnormal lamp or lamp circuit conditions. If by any chance anything is wrong with the lamp or lamp circuit or if the lamp error detection feature is activated for some reason, the following will result.
Page 73
July 2011 Service Mode 5. Lamp Error Detection (cont...) 2) Resetting the lamp error count After the lamp and lamp circuit are improved from a trouble, reset the lamp error count. (Because the power cannot be turned on, if a lamp error is detected 5 consecutive times.) a) Enter the adjustment process mode, referring to “4.
Page 74
July 2011 Service Mode STAND-BY ERROR LED BLINKING Table LED flashing specification at the time of the error Display method • Refer to Table 1. • LED that can be used are only one of the central icon (Emblem Unit). This expresses the error situation by combining blinking at low speed and blinking at high speed.
Page 75
July 2011 Service Mode STAND-BY ERROR LED BLINKING Table (cont...) Issued by: CE After Sales Service...
Page 76
July 2011 Service Mode STAND-BY ERROR LED BLINKING Table (cont...) Issued by: CE After Sales Service...
Page 77
July 2011 Service Mode STAND-BY ERROR LED BLINKING Table (cont...) Issued by: CE After Sales Service...
Page 78
July 2011 Service Mode Monitor ERROR STBY Table Issued by: CE After Sales Service...
Page 79
July 2011 Service Mode LED Flashing Timing Chart Error Issued by: CE After Sales Service...
Page 80
July 2011 Service Mode LED Flashing Timing Chart Error (cont...) Issued by: CE After Sales Service...
Page 81
July 2011 Service Mode LED Flashing Timing Chart Error (cont...) Issued by: CE After Sales Service...
Page 82
July 2011 Service Mode LED Flashing Timing Chart Error (cont...) Issued by: CE After Sales Service...
July 2011 USB Clone Screen transition Issued by: CE After Sales Service...
Page 86
July 2011 USB Clone Password Screen Issued by: CE After Sales Service...
Page 87
July 2011 USB Clone Copy Mode (TV to USB) Issued by: CE After Sales Service...
Page 88
July 2011 USB Clone Copy Mode (USB to TV) Issued by: CE After Sales Service...
Page 89
July 2011 USB Clone Clone Restrictions Issued by: CE After Sales Service...
Page 90
July 2011 Adjustment Process Factory adjustments 1. Adjustment method after PEB and/or IC replacement due to repair The unit is set to the optimum at the time of shipment from the factory. If any value should become improper or any adjustment is necessary due to the part replacement, make an adjustment according to the following procedure.
Page 91
July 2011 Adjustment Process Factory adjustments (cont...) • Caution when replacing ICs in the MAIN Unit (IC8401, IC3303) When replacing either IC8401 or IC3302, exchange MAIN units for DKEYDF733FM51, DKEYDF733FM52 Each part should not be individually exchanged. IC8401 RH-iXD287WJQZQ Flash IC3303 RH-iXD220WJQZQ Main CPU...
Page 92
July 2011 Adjustment Process Factory adjustments (cont...) 2. After replacing the LCD panel or LCD control/MAIN UNIT, check MODEL NAME in the following procedure. 1) Enter the process adjustment mode in TV. 2) Use the cursor keys (UP / DOWN) and CH keys (UP / DOWN) of R/C to select the item [MODEL NAME] on the page 24/24.
Page 93
July 2011 Adjustment Process Issued by: CE After Sales Service...
Page 94
July 2011 Adjustment Process Issued by: CE After Sales Service...
Page 95
July 2011 Adjustment Process Issued by: CE After Sales Service...
Page 96
July 2011 Adjustment Process Issued by: CE After Sales Service...
Page 97
July 2011 Adjustment Process 10. White Balance Adjustment For white balance adjustment, adjust the offset values on pages 11/24. [Condition of the unit for inspection] : Modulated light (+16) AV MODE: DYNAMIC Active Backlight: OFF OPC: OFF Asing Time: Min, 60 minute [Input signal condition] : HDMI 1080i 15IRE (LO), 78IRE (HI) [Adjustment reference device]...
Page 98
July 2011 Thank You No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. Issued by: CE After Sales Service...