Ez Setup; Channel Setup; Antenna Setting; Language Setting - Sharp AQUOS LC-57D90U Operation Manual

Basic adjustment settings

EZ Setup

You can run EZ Setup again, even after setting up the
preset channels.

Language setting

Select from among 3 languages: English, French and
Spanish.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press a/b to select "EZ Setup", and then
3
press ENTER.
• If you already set the Secret No., go to step 4. If
not, skip to step 5.
Input the 4-digit secret number by using 0 – 9.
4
Press a/b to select the desired language
5
listed on the screen, and then press ENTER.

Antenna setting

Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable" for ANALOG and
DIGITAL (Cable).
Press c/d to select "Air", "Cable", for
6
ANALOG, then press b to move down.
Press c/d to select "Standard", "HRC",
"IRC" for DIGITAL (Cable).
Press ENTER to enter the setting.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one matches
to your TV.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Press c/d to select "Yes" for ANALOG, then
7
press b to move down.
Press c/d to select "Yes" for DIGITAL (Air),
then press b to move down.
Press c/d to select "Yes" for DIGITAL
(Cable), and press b to move down.
Select "Search Start", and then press
ENTER.
• This operation makes the TV search for both
ANALOG, DIGITAL (Air) and DIGITAL (Cable)
channels.
Press MENU to exit.
8
NOTE
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again.
• Make sure what kind of connection is made with your TV.
22

Channel Setup

If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press a/b to select "CH Setup", and then
3
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 54 for
setting a secret number.
Press a/b to select "Air/Cable", and then
4
press ENTER.
Press c/d to select "Air", "Cable", for
5
ANALOG, then press b to move down.
Press c/d to select, "Standard", "HRC",
"IRC" for DIGITAL (Cable).
Press ENTER to enter the setting.
Press MENU to exit.
6
NOTE
• Make sure what kind of connection is made with your TV.
• There are 3 kinds of CATV system, including Standard,
HRC and IRC. Select the one matches to your TV.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Repeat steps 1 to 3 in Antenna setting in
1
Channel Setup.
Press a/b to select "CH Search", and then
2
press ENTER.
Press c/d to select "Yes" for ANALOG, then
3
press b to move down.
Press c/d to select "Yes" for DIGITAL (Air),
then press b to move down.
Press c/d to select "Yes" for DIGITAL
(Cable), and press b to move down.
Select "Search Start", and then press
ENTER.
Press MENU to exit.
4
NOTE
• Make sure what kind of connection is made with your TV.